Network settings
Network Adapter Selection and Configuration
Calibration PRO Server and Client Instances: Must use the network card (NIC) from the same network.
- Example:
- Server PC:
192.168.178.1 - Client PC1:
192.168.178.2 - Client PC2:
192.168.178.3
- Server PC:
Default Ports for Immersive Calibration PRO:
- Discovery:
TCP:56000 - Control:
TCP:55555
Important
Changes of Discovery Port and Control Port must be done on all PCs in the same way!
Adapter Change:
- By default, TCP Discovery and Discovery Interfaces listening on all network adapters (
AnyIPv4 (0.0.0.0)). - Change the adapter from
AnyIPv4 (0.0.0.0)(all adapters) to a specific adapter to restrict the remote control functionality to this network interface.
Port Change
Changes of Discovery Port and Control Port must be done on all PCs in the same way!
Server network settings
Access from Menu > File > Advanced settings > Network
- Discovery:
- Bonjour zero-config. Use this with Bonjour discovery
- Direct server connection. Use this with Direct server discovery
- Network: Direct server discovery network. Select the network interface if you have multiple NICs on your system or reave to
AnyIPv4 (0.0.0.0) - Port: Direct server discovery port. Select IP port or leave the default
TCP:56000
Client network settings
Access from Menu > Settings
- Network adapter: The network adapter on which the Client receives Control from Server. Select the network interface if you have multiple NICs on your system or reave to
AnyIPv4 (0.0.0.0) - Port: Client control port. Select IP port or leave the default
TCP:55555 - Discovery:
- Bonjour zero-config. Use this with Bonjour discovery
- Direct server connection. Use this with Direct server discovery
- Server IP address: The IP address of the Server instance, when the Server si configured for Direct server discovery
- Port: Direct server discovery port. Select IP port or leave the default
TCP:56000